High Stability IP65 100mv/G 500mv/G Intrinsically Safe Piezoelectric Accelerometer Acceleration Composite Sensor
Built-in IEPE circuit, isolated floating, two-core low resistance voltage or 4-20mA output, strong anti-interference.
| ACCELERATION | |
| Range | +10g，+50g Optional |
| Output of acceleratior | 100mV/g，500mV/g Optional |
| Amplitude nonlinearity | 土1% |
| Frequency response | 1~9,000Hz(+1dB) 0.5-15,000Hz(+3dB) |
| Transverse sensitivity | ≤5% |
| Supply voltage | 18-24VDC(Constant current source) |
| Constant current source excitation | 2-10mA (Typical value: 4mA) |
| Output impedance | ＜100Ω |
| Dynamic range | ±5V (Peak) |
| Bias voltage | +10V~+14V |
| Signal pair shielding | ≥108Ω |
| Noise | ＜50μV |
| Working temperature | -40°C~+85℃ |
| Impact limit (peak) | 2000g |
| Structural form and piezoelectric materials | Shear/ PZT-5 |
| TEMPERATURE | |
| Temperature range | -40~+120℃ |
| Temperature signal | Pt100 A-level(+0.15%) |
| COMMON | |
| Shell material | 304Stainless steel |
| Protection level | IP65 |
| Electrical connector | MlL-C-5015 2-pin (acceleration) or MlL-C-5015 4-pin/5-pin (acceleration+temperature) |
| Weight | ~80g |
| ACCESSORIES | |
| Install bolts | 1/4-28 Adapter bolt |
| Connecting cables | MIL-C-5015 Connecting cable (3 m) |